STC Easy2Build Easy-Grow 8' x 8' Assembly Instructions Manual page 45

9.3A
From the inside of the greenhouse, insert long side of cable connector S06
into channel of pro le L07A with hook facing the back. Slide connector to
other side of channel. Use hex key to securely tighten and hold in place.
Attach one side of long cable S07 to hook and lace behind pro le L14B. Attach other side of cable to
9.3B
a second S06 cable connector. With hook facing the front, insert connector into channel of pro le L01C.
L03A
L01C
VIEWS FROM INSIDE.
Repeat step 9.3 inserting cable connectors S06 into pro le L07A with hook facing the front and into
9.4
pro le L01C with hook facing the back. Cable rests behind pro le L14A. Slide connector until pro le
corners are square and cable is tight. Use hex key to securely tighten second connector to hold in place.
L07A
L03A
VIEWS FROM INSIDE.
9.5
Repeat step 9.1 through 9.4 on the other side of
the greenhouse.
L07B
L02B
L14B
L14A
L01C
L01C
www.stcny.com
9.3C Push towards center until pro le corners are square and cable
is tight. Use hex key to securely tighten and hold in place.
L03A
L01C
L07A
L02A
L07A
L02A
IMPORTANT: Make sure all corners
are squared at 90 degrees.
L01C
L02A
IMPORTANT: Make sure all corners
are squared at 90 degrees.
Hex Key Cable Connector
QTY
1
43 of 55
L07A
L14B
L03A
L07A
L03A
Cable
QTY
#S06 12
L02A
L01C
L02A
L14B
L01C
QTY
#S07 6