STC Easy2Build Easy-Grow 8' x 8' Assembly Instructions Manual page 49

Stand on a small step ladder inside the greenhouse. Install second roof vent to the left side of
10.9A
the greenhouse. Slide pro le L11A into pro le L08B from the back of the greenhouse towards
the front.
Continue to slide vent past the end of
10.9B
pro le L08B until the hole in the other end
is visible. Screw S24A into hole in L08B
and slide vent back until it rests next
to the screw.
10.9C Use the hairpin clips connected
to L05D to secure the handle and
prevent the vent from opening
and closing in high winds.
S25
L05D
10.10A
From the inside of the greenhouse open arms of auto vent slightly. Line up window bracket
on arm B to holes in vent pro le L10A and attach with two S41A screws.
arm B
10.10B Slide bolts in channel of pro le L05G until they t into holes on end of arm A. Secure with
two S14 hex nuts.
www.stcny.com
L08B
S24A
L10A
L05G
arm A
L05G
L11A
L05D
L10A
NOTE: ALL VIEWS ARE FROM INSIDE.
L05G
47 of 55
L08B
Screw
S41A
S14
Nut / Screw
QTY
#S24A 1
QTY
#S14 2
#S41A 2