Control Section - Roland DiscLab CDX-1 Owner's Manual

Panel Descriptions

Control section

fig.14-13e
NO/EXIT
1 2
button
1
NO/EXIT Button
Press this when you wish to return to the previous screen (i.e.,
the next higher screen in the hierarchy). You can also press
this to respond "no" to a message displayed in the screen.
2
YES/ ENTER Button
Press this to execute a menu selection. You can also press this
to respond "yes" to a message displayed in the screen.
3
CURSOR Button
When making various settings, use these buttons to move the
cursor to the item you wish to set. In screens that consist of
multiple pages, these buttons are also used to move between
pages.
4
TIME/VALUE Dial
In screens where there are no items to set, such as the Pre/
post-fader screen (p. 37) and Sequence Play List screen (p. 37),
use these buttons to move the current location of the song.
When making settings for various functions, these modify the
value of the item selected by the cursor.
If you turn the TIME/VALUE dial clockwise, the value will increase
continuously. If you turn the dial counterclockwise, the value will
decrease continuously.
28
YES/ENTER
button
3
CURSOR
buttons
4
TIME/VALUE
dial
CD-RW/CD-R/AUDIO CD indicator section
An indicator will light to show the type of CD that is inserted.
fig.14-14e
CD-RW CD-R
1 2
indicator indicator
1
CD-RW indicator
Indicates that a CD-RW disc is inserted.
2
CD-R indicator
Indicates that a CD-R disc is inserted.
3
AUDIO CD indicator
Indicates that an audio CD type disc is inserted.
4
BUSY indicator
This indicator will light in red when the inserted CD is being
read or written.
Eject button
fig.14-14ae
EJECT button
Eject button
This button opens or closes the CD disc tray.
If you need to remove the CD after the power has been turned off,
you must turn on the power once again and press [EJECT] to remove
the CD. If you attempt to remove the CD by force, you may damage
the disc tray.
AUDIO CD BUSY
3 4
indicator indicator