Cosm Bass Amp (Cosm Bass Guitar Amp) - Roland DiscLab CDX-1 Owner's Manual

Multitrack cd recorder/audio sample workstation
Hide thumbs Also See for DiscLab CDX-1:
Table of Contents

Advertisement

Insert effect algorithm list

11. COSM BASS AMP (COSM Bass Guitar Amp)

This is a multi-effect designed for bass guitar. This features an amp sound that uses a preamp and speaker modeling.
Compressor
Noise
Suppressor
Parameter (full name)
COMP (Compressor): Compressor the entire output signals when the input volume exceeds a specified value.
Effect On/Off (Effect On/Off)
Sustain (Sustain)
Attack (Attack)
Level (Output Level)
P.AMP (Preamp): Adjust the distortion and tone of the guitar sound.
Effect On/Off (Effect On/Off)
Amp Type (Amp Type) *1
Volume (Volume)
Bass (Bass)
Middle (Middle)
Treble (Treble)
Master (Master)
Bright (Bright) *2
Gain (Gain) *3
*1 When all Bass, Middle and Treble are set to "0," no sound may be produced depending on the "Amp Type" setting.
*2 Depending on the "Amp Type" setting, this may not be displayed.
*3 successively increase for settings of "LOW," "MIDDLE" and set to "MIDDLE." So, normally set it to "MIDDLE."
196
Speaker
(*1)
PreAmp
Simulator
Equalizer
Delay
(*2)
Chorus
Setting
OFF, ON
0–100
0–100
0–100
OFF, ON
AC
AMG
0–100
-100–+100
-100–+100
-100–+100
0–100
OFF, ON
LOW, MIDDLE, HIGH Adjusts the distortion of the amp. Distortion will successively increase for
*1 Equalizer can be replaced with Wah.
*2 Chorus can be replaced one of the following effects.
Function
This parameter turns the compressor effects on/off.
Adjusts the range (time) over which low-level signals are boosted. Larger
values will result in longer sustain.
Adjusts the strength of the attack. Larger values will result in a sharper
attack, creating a more clearly defined sound.
Adjusts the volume.
Turns the preamp effect on/off.
It produces the vintage sound of an early transistor amp.
It produces the sound of a large double-stack vacuum tube amp with ultra-
lows and a crisp edge.
Adjusts the volume and distortion of the amp.
Adjusts the tone for the low frequency range.
Adjusts the tone for the middle frequency range.
Adjusts the tone for the high frequency range.
Adjusts the volume of the entire preamp.
Turns the bright setting on/off. Bright is switched on to create a lighter and
crisper tone.
settings of "LOW," "MIDDLE" and "HIGH."
Wah
Flanger
Phaser
Pitch Shifter
Doubling
Tremolo/Pan

Advertisement

Table of Contents
loading

Table of Contents