Roland DiscLab CDX-1 Owner's Manual page 146

More functions for the CDX-1
Using the loop effect to create doubling
One technique for spreading the backing guitar between left and right is to record
the same backing performance twice (on separate audio tracks), and then pan the
two tracks to left and right. This is known as doubling.
The CDX-1 provides a "DOUBL'N (doubling)" (p. 174) loop effect that lets you
produce a doubling effect without having to record the same performance twice.
By using the "DOUBL'N (doubling)" effect, doubling can be applied to the mono
recording of a channel after it has already been recorded.
Before you edit the parameters of the "DOUBL'N" (doubling) loop effect, set the pan
settings of the audio track to far left or right.
Reverb
Reverb consists of overlapping sounds reflected from the walls and floor. For
example, if you clap your hands in a large room such as a church, the "wash" of
sound that lingers is the reverb. The character of the reverb is affected by the size of
the space (room, hall, etc.), its shape, and the materials of the wall or other reflecting
surface.
1. Press LOOP EFFECTS [REVERB].
fig.5-21
A screen will appear in which you can adjust
the volume (send level) that is sent from the
pad and each audio track to the reverb.
2. Press CURSOR [
make settings.
When you wish to use the loop effect to the PAD, use CURSOR [
move the "PAD."
You can continue pressing CURSOR [
input source.
When the input source is recorded/sampled adding of the loop effects, the sound
with the added effects is recorded/sampled.
You can also continue pressing CURSOR [
rhythm guide.
3. Turn the TIME/VALUE dial to adjust the send level.
4. Turn the RTN LEVEL knob to adjust the return level.
5. Press LOOP EFFECTS [REVERB] once again.
fig.5-22
A Reverb Setting Screen appears.
For details on the parameters, refer to "Mixer
effect parameter functions" (p. 174).
6. Press [DISPLAY] to return to the Basic screen.
146
] [ ] to select the audio track for which you wish to
] [ ] and adjust the send level of the
] and adjust the send level of the
For details on pan settings for
an audio track, refer to
"Setting the left/right position
(pan) of an audio track."
] [ ] to