Roland DiscLab CDX-1 Owner's Manual page 186

Insert effect algorithm list
EQ (Equalizer): A 4-band equalizer.
Effect On/Off (Effect On/Off)
Low Gain (Low Gain)
Low-Mid Gain (Low-Mid Gain)
Low-Mid Freq (Low-Mid Freq)
Low-Mid Q (Low-Mid Q)
High-Mid Gain (High-Mid Gain)
High-Mid Freq (High-Mid Freq)
High-Mid Q (High-Mid Q)
High Gain (High Gain)
Level (Output Level)
WAH (Wah): The wah effect creates a unique tone by changing the frequency response characteristics of a filter.
Effect On/Off (Effect On/Off)
Polarity (Polarity)
Sensitivity (Sens)
Frequency (Frequency)
Peak (Peak)
Level (Level)
NS (Noise Suppressor): This effect reduces the noise and hum.
Effect On/Off (Effect On/Off)
Threshold (Threshold) *
Release (Release)
* High settings for the Threshold parameter may result in there being no sound when you play with your instruments volume turned down.
Modulation effect type
The Modulation effect type can be selected from the following effects. For details on each effect, refer to "Available types of
modulation and their effect" (p. 202).
FLANGER
(Flanger)
CHORUS
(Chorus)
PHASER
(Phaser) *
P.SHIFT
(Pitch Shifter)
DOUBL'N
(Doubling)
TRM/PAN
(Tremolo/Pan)
SLO ATK
(Slow Attack) *
* In case of "Phase" and "Slow Attack", output will become monaural.
186
OFF, ON
-20–+20 dB
-20–+20 dB
100–10.0 kHz
0.5–16
-20–+20 dB
100–10.0 kHz
0.5–16
-20–+20 dB
-20–+20 dB
OFF, ON
UP
DOWN
0–100
0–100
0–100
0–100
OFF, ON
0–100
0–100
: The flanger effect gives a twisting, jet-airplane-like character to the sound.
: A sound with a subtly shifted pitch is added to the direct sound, making the final output sound thicker
and broader.
: By adding varied-phase portions, the phaser effect gives a whooshing, swirling character to the sound.
: This effect changes the pitch of the original sound (up or down) within a range of two octaves.
: An effect of multiple sounds heard together (a doubling effect) is produced.
: Tremolo is an effect that creates a cyclic change in volume.
Pan cyclically moves the stereo position between left and right (when stereo output is used).
: This produces a volume-swell effect ("violin-like" sound).
This parameter turns the equalizer effect on/off.
This parameter sets the gain (amount of boost or cut) for the bass
equalizer.
This parameter sets the gain (amount of boost or cut) for the low-midrange
equalizer.
This parameter sets the central frequency for the low-midrange equalizer.
This parameter sets the range of change in gain for the frequency set by
"Low-Mid Freq." A larger value results in a narrower range of change.
This parameter sets the gain (amount of boost or cut) for the high-midrange
equalizer.
This parameter sets the central frequency for the high-midrange equalizer.
This parameter sets the range of change in gain for the frequency set by
"High-Mid Freq." A larger value results in a narrower range of change.
This parameter sets the gain (amount of boost or cut) for the treble
equalizer.
This parameter adjusts the volume after the equalizer stage.
This parameter turns the wah effect on/off.
The frequency of the filter will rise.
The frequency of the filter will fall.
This adjusts the sensitivity at which the filter will change in the direction
determined by the polarity setting. Higher values will result in a stronger
response. With a setting of "0," the strength of picking will have no effect.
This adjusts the center frequency of the Wah effect.
Adjusts the way in which the wah effect applies to the area around the
center frequency. Lower values will produce a wah effect over a wide area
around the center frequency. Higher values will produce a wah effect in a
narrow area around the center frequency.With a value of "50" a standard
wah sound will be produced.
Adjusts the volume.
This parameter turns the noise suppressor effect on/off.
Adjust this parameter as appropriate for the volume of the noise. If the
noise level is high, a higher setting is appropriate. If the noise level is low,
a lower setting is appropriate. Adjust this value until the decay of the sound
is as natural as possible.
Adjusts the time from when the noise suppressor begins to function until
volume reaches "0."