Roland DiscLab CDX-1 Owner's Manual page 239

Cutting Segments—Cut
This operation cuts the phrases of the specified region. Any phrases that followed
the region will be moved forward.
1. Specify the region that you want to cut, as
described in "Specifying the editing
region" (p. 9) of this booklet.
2. Press [YES/ENTER].
A mini-menu appears.
3. Press CURSOR [
"REGION CUT?"
4. Press [YES/ENTER].
The specified region are cut.
Moving to a Another Location—Move
This operation moves the phrases of the specified region to another location. The
phrases in the specified region will be erased; i.e., they will change to silence. If there
were any phrases in the move-destination, they will be overwritten by the phrases
from the specified region.
1. Specify the region that you want to move,
as described in "Specifying the editing
region" (p. 9) of this booklet.
2. Use the REW[
TIME/VALUE dial to set the move-
destination "NOW" (current location).
3. Press [YES/ENTER].
A mini-menu appears.
4. Press CURSOR [
"REGION MOVE?"
5. Press [YES/ENTER].
The specified region are moved.
] to select the
] /FF [ ] or the
] to select the
Editing a specified region of a sequence track
11