Roland DiscLab CDX-1 Owner's Manual page 202

Insert effect algorithm list
Available types of modulation and their effect
Parameter (full name)
[FLG] FLANGER (Flanger): The flanger effect gives a twisting, jet-airplane-like character to the sound.
Effect On/Off (Effect On/Off)
Rate (Rate)
Depth (Depth)
Manual (Manual)
Resonance (Resonance)
Separation (Separation)
[CHO] CHORUS (Chorus):
Effect On/Off (Effect On/Off)
Rate (Rate)
Depth (Depth)
Pre Delay (Pre Delay)
Effect Level
Best results will be achieved when stereo output is used.
[PH] PHASER (Phaser): By adding varied-phase portions, the phaser effect gives a whooshing, swirling character
Effect On/Off (Effect On/Off)
Rate (Rate)
Depth (Depth)
Manual (Manual)
Resonance (Resonance)
[PS] P.SHIFT (Pitch Shifter): This effect changes the pitch of the original sound (up or down) within a range of two
Effect On/Off (Effect On/Off)
Pitch (Pitch) *
D:E Balance (Effect Balance)
Separation (Separation)
[DBL] DOUBL'N (Doubling): An effect of multiple sounds heard together (a doubling effect) is produced.
Effect On/Off (Effect On/Off)
Delay Time (Delay Time)
Separation (Separation)
Effect Level (Effect Level)
The best effect is achieved when stereo output is used.
202
Setting
OFF, ON
0–100
0–100
0–100
0–100
0–100
A sound with a subtly shifted pitch is added to the direct sound, making the final output
sound thicker and broader.
OFF, ON
0–100
0–100
0.5–50 mS
0–100
to the sound.
OFF, ON
0–100
0–100
0–100
0–100
octaves.
OFF, ON
-24–DETUNE–+24
100:0–0:100
-100–+100
OFF, ON
0.5–50 mS
-100–+100
0–120
Function
This parameter turns the flanger effect on/off.
Determines the rate of the flanging effect.
Determines the depth of the flanging effect.
Adjusts the center frequency at which to apply the effect.
Determines the amount of resonance (feedback). Increasing the value will
emphasize the effect, creating a more unusual sound.
Adjusts the diffusion. The diffusion increases as the value increases.
Effective when stereo output is used.
This parameter turns the chorus effect on/off.
Adjusts the rate of the Chorus effect.
Adjusts the depth of the Chorus effect.
Adjusts the time needed for the effect sound to be output after the direct
sound has been output.
Adjusts the volume of the effect sound.
This parameter turns the phaser effect on/off.
This sets the rate of the Phaser effect.
Determines the depth of the Phaser effect.
Adjusts the center frequency of the phaser effect.
Determines the amount of resonance (feedback). Increasing the value will
emphasize the effect, creating a more unusual sound. Setting it to a minus
value will create resonance having a reversed phase.
This parameter turns the pitch shifter effect on/off.
Adjusts the amount of pitch shift (the amount of pitch change) in semitone
steps. By selecting "DETUNE," you can add a slightly pitch-shifted sound
to the input sound, producing a detune effect.
This adjusts the volume balance of the direct and effect sounds.
Adjusts the diffusion. The panning of the direct sound and effect sound can
be spread to left and right. Effective when stereo output is used.
This parameter turns the doubling effect on/off.
This parameter adjusts the delay time (i.e., the interval for which sound is
delayed).
Adjusts the diffusion. The panning of the direct sound and effect sound can
be spread to left and right. Effective when stereo output is used.
This adjusts the volume of the delay sound.