Using The Cdx-1 As An Mmc Slave - Roland DiscLab CDX-1 Owner's Manual

Using the CDX-1 as an MMC slave

1. Make the following connections.
fig.5-31
MIDI IN
The CDX-1 will be the MMC slave, but the MTC master.
2. Press [UTILITY].
The Menu are displayed as icon.
fig.12-06
3. Press CURSOR [
icon.
4. Press [YES/ENTER].
The MIDI settings screen appears.
fig.12-07
5. Press CURSOR [
"MMC Mode" line.
6. Turn the TIME/VALUE dial to select "SLAVE."
For details on the MMC Mode, refer to step 6 of "Using the CDX-1 as the MMC
master," above.
7. Make settings to allow MTC synchronization.
Perform steps 5 and following of "Using MTC (master)" (p. 154).
8. Make settings on your sequence software.
Make the following settings on your sequencer software. For details on making these
settings, refer to the manual for your sequencer software.
• MTC: receive
• MTC type: same setting as the MTC Type selected on the CDX-1
• MMC: transmit
9. Press [DISPLAY] to return to the Basic screen.
MIDI OUT MIDI IN
CDX-1
] to select the MIDI
] to move the cursor to
Using the CDX-1 with other MIDI devices
MIDI OUT
For details on the MMC
functionality that is supported,
refer to "MIDI
Implementation" (p. 212).
157