Roland DiscLab CDX-1 Owner's Manual page 187

DLY (Delay): This creates a thicker sound by applying a delayed sound to the direct sound.
Effect On/Off (Effect On/Off)
Effect Type (Type)
Delay Time (Delay Time)
Feedback (Feedback)
Effect Level (Effect Level)
Preamp
Models the preamp section of a guitar amp. Set the desired type for Amp Type.
JC-120 : The sound of the Roland "JC-120" (Jazz Chorus 120), a favorite of pro musicians around the world.
CLEAN : The sound of a conventional built-in tube amp.
CRUNCH : Allows you to obtain a crunch effect that creates a natural distortion.
MATCH : A modeling of the latest tube amp widely used in styles from blues and rock.
VO DRV : Allows you to obtain the Liverpool sound of the 60's.
BLUES : A lead sound with a rich middle ideal for Blues.
BG LEAD : The sound of a tube amp typical of the late '70s to '80s, characterized by a distinctive mid-range.
MS(1, 2, 1+2) : The sound of a large tube amp stack that was indispensable to the British hard rock of the 70's, and is used to
this day by many hard rock guitarists.
MS(1) : A trebly sound created by using input I of the guitar amp.
MS(2) : A mild sound created by using input II of the guitar amp.
MS(1+2) : The sound of connecting inputs I and II of the guitar amp in parallel, creating a sound with a stronger low end than I.
SLDN : A tube amp sound with versatile distortion, usable in a wide range of styles.
METAL : The sound of a large tube amp, suitable for heavy metal.
METAL D : A high gain and powerful metal sound.
Speaker modeling
The characters of the following types of speakers can be modeled. Set the desired type for Speaker Type.
Speaker Type Cabinet
SMALL Small open-back enclosure
MIDDLE Open-back enclosure
*2
JC-120 Open-back enclosure
TWIN Open-back enclosure
twin Open-back enclosure
MATCH Open-back enclosure
match Open-back enclosure
VO DRV Open-back enclosure
vo drv Open-back enclosure
BG STK Large Sealed enclosure
bg stk Large Sealed enclosure
MS STK Large Sealed enclosure
ms stk Large Sealed enclosure
METAL Large dual stack
*1 "On Mic" models sound when a dynamic microphone is used.
"Off Mic" models sound when a condenser microphone is used.
*2 Roland JC-120 Modeling
OFF, ON This parameter turns the delay effect on/off.
SINGLE This is a simple delay.
TAP The delayed sound is panned across the left and right channels. This will
be effective when stereo output is used.
SINGLE: 1–1400 mS This parameter adjusts the delay time (i.e., the interval for which sound is
delayed).
TAP: 1–700 mS
0–100 This parameter adjusts the amount of feedback. Changing the amount of
feedback causes the number of time the delayed sound is repeated to
change as well.
0–120 This adjusts the volume of the delay sound.
Speaker Unit
10 inch
12 inch
12 inch (two units)
12 inch (two units)
12 inch (two units)
12 inch (two units)
12 inch (two units)
12 inch (two units)
12 inch (two units)
12 inch (two units)
12 inch (two units)
12 inch (four units)
12 inch (four units)
12 inch (four units)
Insert effect algorithm list
Microphone Well-matched
*1
Setting preamp type
On Mic
On Mic Clean, Crunch, Blues
On Mic JC-120
On Mic Clean, Crunch
Off Mic Clean, Crunch
On Mic Match, Blues
Off Mic Match, Blues, BG Lead
On Mic Vo drv
Off Mic Vo drv
On Mic BG Lead
Off Mic BG Lead
On Mic MS(1), MS(2), MS(1+2), Sldn,
Metal, Meal D
Off Mic MS(1), MS(2), MS(1+2), Sldn,
Metal, Meal D
Off Mic MS(1), MS(2), MS(1+2), Sldn,
Metal, Meal D
187