Roland DiscLab CDX-1 Owner's Manual page 23

AUDIO TRACK section
fig.14-04e
1
STATUS buttons
2
AUDIO TRACK faders
1
STATUS buttons 1–8
These switch the status of each audio track. The current status
is shown by the color of the button.
• Extinguished: Sound will not be output (i.e., muted).
• Lit in green: The track is ready for playback.
• Blinking in red: The track is selected as a recording
destination.
• Lit in red: The track is now being recorded.
2
AUDIO TRACK faders
These adjust the volume of each audio track.
TRACK EDIT section
fig.14-05e
1
PAN button
1
PAN Button
This displays a screen where you can set pan (left/right
positioning of the sound) for each audio track.
"Setting the left/right position (pan) of an input sound"
(p. 113), "Setting the left/right position of each audio track"
(p. 132)
2
EQ (Equalizer) Button
This accesses a screen where you can make equalizer settings
to modify the tone of each audio track.
"Adjusting the tone of each audio track—Equalizer" (p. 132)
RHYTHM GUIDE section
Here you can make settings for the Rhythm Guide function.
"Using the rhythm guide" (p. 116)
fig.14-05ae
1 2
ON/OFF button
1
ON/OFF button
Pressed to cycle the Rhythm Guide function through the
available selections: Auto
2
PATTERN/TEMPO button
This accesses a screen where you can set the rhythm pattern
and tempo.
Panel Descriptions
2
EQ button
PATTERN TEMPO button
On Off.
23