12. Vocal Multi - Roland DiscLab CDX-1 Owner's Manual

12. VOCAL MULTI

This is a multi-effect designed for vocals. It provides the basic effects needed for vocals.
Compressor
Noise
Suppressor
Parameter (full name)
COMP (Compressor): Compressor the entire output signals when the input volume exceeds a specified value.
Effect On/Off (Effect On/Off)
Sustain (Sustain)
Attack (Attack)
Level (Output Level)
DES (De-esser): Useful for reducing 'sibilant' or 'S' sounds produced by a vocalist.
Effect On/Off (Effect On/Off)
Sibilant Level (Sibilant Level)
Level (Level)
ENH (Enhancer): This effect enhances the definition of the sound, and pushes it to the forefront.
Effect On/Off (Effect On/Off)
Sensitivity (Sens)
Frequency (Frequency)
Mix Level (Mix Level)
Low Mix Level (Low Mix Level)
Level (Level)
EQ (Equalizer): A 4-band equalizer.
Effect On/Off (Effect On/Off)
Low Gain (Low Gain)
Low-Mid Gain (Low-Mid Gain)
Low-Mid Freq (Low-Mid Freq)
Low-Mid Q (Low-Mid Q)
High-Mid Gain (High-Mid Gain)
High-Mid Freq (High-Mid Freq)
High-Mid Q (High-Mid Q)
High Gain (High Gain)
Level (Output Level)
De-esser Enhancer Equalizer
Delay
(*1)
Chorus
Setting
OFF, ON
0–100
0–100
0–100
OFF, ON
0–100
0–100
OFF, ON
0–100
1.0 –10.0 kHz
0–100
0–100
0–100
OFF, ON
-20–+20 dB
-20–+20 dB
100–10.0 kHz
0.5–16
-20–+20 dB
100–10.0 kHz
0.5–16
-20–+20 dB
-20–+20 dB
Insert effect algorithm list
*1 Chorus can be replaced one of the following effects.
Function
This parameter turns the compressor effects on/off.
Adjusts the range (time) over which low-level signals are boosted. Larger
values will result in longer sustain.
Adjusts the strength of the attack. Larger values will result in a sharper
attack, creating a more clearly defined sound.
Adjusts the volume.
This parameter turns the de-esser effect on/off.
Adjusts the sensitivity relative to the input volume, which controls how the
effect is applied.
Adjusts the volume.
This parameter turns the enhancer effect on/off.
Adjusts the manner in which the enhancer will be applied relative to the
input signals.
Adjusts the frequency at which the enhancer effect will begin to be applied.
The effect will be made apparent in the frequencies above the frequency
set here.
Adjusts the amount of phase-shifted sound of the range set by "Frequency"
that is to be mixed with the input.
Adjusts the amount of phase-shifted sound of the lower range that is to be
mixed with the input.
Adjusts the volume of the enhanced sound.
This parameter turns the equalizer effect on/off.
This parameter sets the gain (amount of boost or cut) for the bass
equalizer.
This parameter sets the gain (amount of boost or cut) for the low-midrange
equalizer.
This parameter sets the central frequency for the low-midrange equalizer.
This parameter sets the range of change in gain for the frequency set by
"Low-Mid Freq." A larger value results in a narrower range of change.
This parameter sets the gain (amount of boost or cut) for the high-midrange
equalizer.
This parameter sets the central frequency for the high-midrange equalizer.
This parameter sets the range of change in gain for the frequency set by
"High-Mid Freq." A larger value results in a narrower range of change.
This parameter sets the gain (amount of boost or cut) for the treble
equalizer.
This parameter adjusts the volume after the equalizer stage.
Flanger
Phaser
Pitch Shifter
Doubling
Tremolo/Pan
199