Stereo Multi - Roland DiscLab CDX-1 Owner's Manual

Insert effect algorithm list

1. STEREO MULTI

This algorithm connects seven types of effect, all in full stereo.
Compressor
Noise
Suppressor
Parameter (full name)
COMP (Compressor): Compressor the entire output signals when the input volume exceeds a specified value.
Effect On/Off (Effect On/Off)
Sustain (Sustain)
Attack (Attack)
Level (Output Level)
RNG (Ring Modulator): This creates a bell-like sound. The sound will be unmusical and lack distinctive pitches.
Effect On/Off (Effect On/Off)
Frequency (Frequency)
Effect Level (Effect Level)
Direct Level (Direct Level)
EQ (Equalizer): A 4-band equalizer.
Effect On/Off (Effect On/Off)
Low Gain (Low Gain)
Low-Mid Gain (Low-Mid Gain)
Low-Mid Freq (Low-Mid Freq)
Low-Mid Q (Low-Mid Q)
High-Mid Gain (High-Mid Gain)
High-Mid Freq (High-Mid Freq)
High-Mid Q (High-Mid Q)
High Gain (High Gain)
Level (Output Level)
176
Ring
(*1)
Modulator Equalizer
(*2) Delay
Chorus
Setting
OFF, ON
0–100
0–100
0–100
OFF, ON
0–100
0–100
0–100
OFF, ON
-20–+20 dB
-20–+20 dB
100–10.0 kHz
0.5–16
-20–+20 dB
100–10.0 kHz
0.5–16
-20–+20 dB
-20–+20 dB
*1 Equaliser can be replaced with Wad.
*2 Chorus can be replaced one of the following effects.
Function
This parameter turns the compressor effects on/off.
Adjusts the range (time) over which low-level signals are boosted. Larger
values will result in longer sustain.
Adjusts the strength of the attack. Larger values will result in a sharper
attack, creating a more clearly defined sound.
Adjusts the volume.
This parameter turns the ring modulator effect on/off.
This adjusts the frequency of the internal oscillator.
This adjusts the volume of the effect sound.
This adjusts the volume of the direct sound.
This parameter turns the equalizer effect on/off.
This parameter sets the gain (amount of boost or cut) for the bass
equalizer.
This parameter sets the gain (amount of boost or cut) for the low-midrange
equalizer.
This parameter sets the central frequency for the low-midrange equalizer.
This parameter sets the range of change in gain for the frequency set by
"Low-Mid Freq." A larger value results in a narrower range of change.
This parameter sets the gain (amount of boost or cut) for the high-midrange
equalizer.
This parameter sets the central frequency for the high-midrange equalizer.
This parameter sets the range of change in gain for the frequency set by
"High-Mid Freq." A larger value results in a narrower range of change.
This parameter sets the gain (amount of boost or cut) for the treble
equalizer.
This parameter adjusts the volume after the equalizer stage.
Wah
Flanger
Phaser
Pitch Shifter
Doubling
Tremolo/Pan