Roland DiscLab CDX-1 Owner's Manual page 27

4
FF (fast-forward) button
The song will fast-forward while you hold down the button.
5
REPEAT button
You can specify a region that you wish to hear, and play it
back repeatedly.
"Specify a region and play it back repeatedly—the Repeat
function" (CD Player; p. 51), "Repeatedly play back a
specified region—the Repeat function" (Multitrack
recording; p. 128)
6
ZERO button
Returns to the beginning of the song.
7
STOP button
Stops recording or playback of the song.
8
PLAY button
Plays back songs.
When REC [ ] is blinking, pressing PLAY [
recording.
9
REC/CD RECORDER (recording/CD recorder)
button
This is the Record button. In addition to the Recording
operation, it is also used for manual punch-in/out.
"Using the Record button to punch-in/out" (p. 121)
Blinking: indicates recording-standby status.
Lit: indicates that recording in progress.
AUTO PUNCH section
Here you can make settings for the punch-in/out function.
fig.14-11e
1 2
IN button OUT button
1
IN button
This button specifies the punch-in location. When you press
[IN], the current location will be memorized as the punch-in
location. After you have specified the punch-in location, you
can press [IN] to move to the punch-in location.
] will start
3
AUTO PUNCH
button
2
OUT button
This button specifies the punch-out location. When you press
[OUT], the current location will be memorized as the punch-
out location. After you have specified the punch-out location,
you can press [OUT] to move to the punch-out location.
3
AUTO PUNCH button
This turns the auto punch-in/out function on/off. When this
is on, the button will light. By using the auto punch-in/out
function, you can automatically punch-in/out at the
previously specified locations.
"Automatically punching-in/out at the specified
locations—Auto punch-in/out" (p. 122)
PREVIEW section
Here you can make settings for the Preview function.
By using the Preview function, you can precisely adjust the
current location while listening to the sound.
"Cueing to a precise location—Preview" (p. 139)
fig.14-12e
1 2
SCRUB TO button
button
1
SCRUB button
This button causes an extremely short region of sound that
ends or begins at the current location to be played repeatedly
(p. 140).
2
TO button
This button plays the sound from a point one second earlier
than the current location to the current location (once only).
If you are in Scrub mode, pressing [TO] will select the region
ending at the current location as the scrub region.
3
FROM button
This button plays the sound from the current location to a
point one second later (once only).
If you are in Scrub mode, pressing [FROM] will select the
region beginning at the current location as the scrub region.
Panel Descriptions
3
FROM button
27