Acoustic Mdl (Acoustic Guitar Modeling) - Roland DiscLab CDX-1 Owner's Manual

Insert effect algorithm list

7. ACOUSTIC MDL (Acoustic Guitar Modeling)

This is a multi-effect designed for electric guitar. It allows you to use an electric guitar to produce sounds similar to those
of an acoustic guitar.
Acoustic
Guitar
Modeling
Noise
Suppressor
Parameter (full name)
A.MDL (Acoustic Guitar Modeling): This models the sound of an acoustic guitar.
Effect On/Off (Effect On/Off)
Pick Up Type (Pick Up Type)
Character (Character)
Top-Hi (Top-Hi)
Top-Mid (Top-Mid)
Body (Body)
Level (Level)
* If Top-Hi, Top-Mid, and Body are all set to "-100", there will be no sound.
If you set the pickup selector of your guitar to the front position, the desired effect will be easier to achieve.
COMP (Compressor): Compressor the entire output signals when the input volume exceeds a specified value.
Effect On/Off (Effect On/Off)
Sustain (Sustain)
Attack (Attack)
Level (Output Level)
188
Compressor Equalizer
Delay
(*1)
Chorus
Setting
OFF, ON
SINGLE, HUMBUCK
STD
JUMBO
ENHANCE
PIEZO
-100–+100 *
-100–+100 *
-100–+100 *
0–100
OFF, ON
0–100
0–100
0–100
*2 Chorus can be replaced one of the following effects.
Function
This parameter turns the acoustic guitar modeling effect on/off.
Set this to the type of pickup on the connected guitar.
This is a normal acoustic guitar.
This is an acoustic guitar with a body that is bigger than STANDARD. The
bass sound is powerful.
This is an acoustic guitar that with a more responsive attack, so the guitar
will retain more of its prominence in almost any situation.
This models the sound you would get from a pickup installed on an electric-
acoustic guitar.During the attack, a certain amount of compression will be
applied.
Adjust the level of the direct sound from the strings. That is, it adjusts the
harmonic contents.
This adjusts the interference to the strings made by the top plate. That is,
it adjusts the attack sense.
This adjusts the resonance of the sound caused by the body. That is, it
adjusts the softness and fatness of the sound which is the typical
characteristics of acoustic guitars.
This adjusts the volume of the acoustic guitar modeling.
This parameter turns the compressor effects on/off.
Adjusts the range (time) over which low-level signals are boosted. Larger
values will result in longer sustain.
Adjusts the strength of the attack. Larger values will result in a sharper
attack, creating a more clearly defined sound.
Adjusts the volume.
Flanger
Phaser
Pitch Shifter
Doubling
Tremolo/Pan