Master Section; Display Section - Roland DiscLab CDX-1 Owner's Manual

MASTER Section

fig.14-15e
1 MASTERING
TOOLS button
2
EDIT button
3
STATUS button
4
1
MASTERING TOOLS Button
This button switches "mastering tools kit" (p. 134) effect on
and off. If CD BURNING mode is selected, this will be turned on
automatically.
2
EDIT Button
Access a screen where you can set the master balance.
"Adjusting the overall volume balance—Master balance"
(p. 132)
3
STATUS Button
Shows the status of the Master track. The current state is
shown by the color of the button.
Mixdown (p. 133), CD Burning (p. 135)
• Blinking in red: Indicates currently in recording-standby
mode.
• Lit in red: Indicates currently recording
• Lit in green: Recorded Master track data is being
played back.
4
MASTER fader
You can adjust the overall volume level
MASTER fader

Display Section

Various information regarding operation will be displayed here.
fig.14-16
1 2
1
TIME/SONG POSITION
<When the CD Player is in use>
Indicates the current time location of the song in "Current
track number/Minute/Second."
<When the multitrack is in use>
Indicates the current time location of the song in "Hour/
Minute/Second/Frame."
Frame display
The number displayed after the current time indicates the
number of frames for the current location in the song.
At the factory settings, one second is set to 30 frames (non-
drop). This is one type of a specification known as MTC (MIDI
Time Code), and when you use the CDX-1 to play in
synchronization with another MIDI device, you will need to
set both devices to the same MTC type.
"Using MTC (Master)" (p. 154)
<When the sequence is in use>
Indicates the current time location of the song in "Measure/
Beat/Tick."
2
MARK
This shows the number of the marker at the current location.
If no marker is registered at the current location, the number
of the marker immediately before the current location will be
displayed.
If the current location is earlier than marker number "001," or if
no marker has been registered, the display will indicate "---".
"Assigning markers within a song—Marker" (p. 129)
3
SEQ TR (Sequence Track)
This indicates symbol the sequence track that is selected as
the playback destination.
"Playing a sequence track" (p. 96)
4
BNK (Pad Bank)
This indicates the number of the currently selected pad bank.
"Switching pad banks" (p. 54)
Panel Descriptions
3 4
29