Using Midi To Control The Cdx-1 From Another Device; Play Samples; Switch The Pad Bank - Roland DiscLab CDX-1 Owner's Manual

Multitrack cd recorder/audio sample workstation
Hide thumbs Also See for DiscLab CDX-1:
Table of Contents

Advertisement

Using MIDI to control the CDX-1 from
another device
The CDX-1 can be controlled in the following ways by MIDI messages from another
MIDI device.

Play samples

By sending MIDI note messages from a keyboard or drum pad to the CDX-1, you can
play the eight samples of the selected pad bank.
To play the samples of the CDX-1, you can choose one MIDI channel from channels 1–16.
1. Press [UTILITY].
The Menu are displayed as icon.
fig.5-24
2. Press CURSOR [
icon.
3. Press [YES/ENTER].
The MIDI settings screen appears.
fig.5-25
4. Make sure that the cursor is located at the
"Pads Rx Ch." line.
5. Turn the TIME/VALUE dial to select a channel in the range of "1"–"16."
If you select "OFF," samples cannot be played by any MIDI channel.
6. Press [DISPLAY] to return to the Basic screen.
At the factory settings, the pads correspond to MIDI note numbers (numbers that
indicate keyboard locations) as follows.
fig.5-26e
Pad
1
2
MIDI
C3
C#3
Note
48
49
Changing the correspondence between pads and note numbers
1. Press [UTILITY].
2. Press CURSOR [
The MIDI settings screen appears.
3. Press CURSOR [
4. Turn the TIME/VALUE dial to specify the note number.
5. Press [DISPLAY] to return to the Basic screen.

Switch the pad bank

The eight samples of the selected pad bank are the only the samples that can be
played by MIDI note messages. To switch the pad bank, use program change
messages.
Of the program numbers sent to the CDX-1, only 1–64 are valid. These select pad
banks 1 through 64 respectively. Program numbers 65–128 will be ignored.
] to select the MIDI
3
4
5
6
7
8
D3
D#3
E3
F3
F#3
G3
50
51
52
53
54
55
] to select the MIDI icon, and press [YES/ENTER].
] to move the cursor to "Rx Note (Pad1)."
Using the CDX-1 with other MIDI devices
The "Pads Tx Ch." parameter
specifies the MIDI channel that
will be used to control another
MIDI device when you press
the pads of the CDX-1.
Eight consecutive MIDI note
numbers are used, according
to the pad numbers. You are
free to specify which note
number will be the first (i.e.,
pad [1]) (see the following
section).
153

Advertisement

Table of Contents
loading

Table of Contents