Major Message List - Roland DiscLab CDX-1 Owner's Manual

Major Message List

Bank is protected.
The operation cannot be executed since the pad bank is
protected.
Canceled.
The operation was canceled.
Can't execute.
Cannot execute this operation.
Can't insert to this point.
Cannot insert to this point.
Can't UNDO.
Undo is not possible.
Can't use PAD/SEQ now.
Pad/Sequence cannot be used.
CD-ROM is not ready.
The CD-ROM from which to load the WAVE file is not ready.
Checking disc...
Checking...
Now checking the disc. Please wait.
Coaxial input locked.
Locked to digital input (coaxial).
Coaxial input unlocked.
Could not lock to digital input (coaxial).
Completed.
The operation has been completed.
Convert data. Are you sure?
Do you want to convert the WAVE file?
DIMM error.
An error occurred while checking the DIMM.
Disc is not for audio.
This disc is not made for audio.
Disc full.
The disc is full.
Do you want to burn a CD?
Do you want to burn the CD?
Do you want to finalize a CD?
Do you want to finalize the CD-R?
Do you want to initialize the disc?
The data will be initialized when you execute the format
operation. Do you want to execute?
Eject disc? (not saved)
Do you want to eject the disc without saving the song?
Finalize failed.
Failed to finalized the disc.
Format failed.
Failed to format the disc.
Initialize All param. Are you sure?
OK to initialize all parameters?
170
Initialize Effects param. Are you sure?
OK to initialize effect parameters?
Initialize Global param. Are you sure?
OK to initialize global parameters?
Initialize Mixer param. Are you sure?
OK to initialize mixer parameters?
Insert a Destination disc.
This disc is the backup source disc.
Please insert the backup destination disc.
Insert CD-R disc.
Insert a CD-R disc.
Insert CD-RW disc.
Insert a CD-RW disc.
Keep take?
Do you wish to save the data on CD-RW disc?
Load error.
An error occurred while loading data.
Load PAD/SEQ data?
Do you want load pad and sequence data?
Marker does not exist.
There are no markers.
Master track does not exist.
There is no master track.
Memory full.
There is not enough memory to execute the operation.
Memory low, cannot UNDO. Continue?
There is not enough memory to undo this operation. Execute
anyway?
MTR disc not ready.
The MTR disc is not inserted in the drive.
No PAD/SEQ data to save. Save anyway?
No pad/sequence data was found.
Not CD-RW disc.
This disc is not a CD-RW disc.
Not HIGH-SPEED CD-RW.
This is not a high-speed compatible CD-RW disc.
Not supported.
The specified file is not in a format that can be converted.
Not WAVE file.
The specified file is not a WAVE file.
Now playing SCRUB.
Now scrubbing.
Now Processing...
Now processing. Please wait.
Now recording...
Now recording pads.