Vo+Gt.amp (Vocal+Guitar Amp) - Roland DiscLab CDX-1 Owner's Manual

Insert effect algorithm list

3. VO+GT.AMP (Vocal+Guitar Amp)

This algorithm is for use when simultaneously recording a vocal and electric guitar. For the guitar, you can produce an
amp sound using a preamp and speaker modeling.
MIC
Parameter (full name)
COMP (Compressor): Compressor the entire output signals when the input volume exceeds a specified value.
Effect On/Off (Effect On/Off)
Sustain (Sustain)
Attack (Attack)
Level (Output Level)
EQ (Equalizer): A 4-band equalizer.
Effect On/Off (Effect On/Off)
Low Gain (Low Gain)
Low-Mid Gain (Low-Mid Gain)
Low-Mid Freq (Low-Mid Freq)
Low-Mid Q (Low-Mid Q)
High-Mid Gain (High-Mid Gain)
High-Mid Freq (High-Mid Freq)
High-Mid Q (High-Mid Q)
High Gain (High Gain)
Level (Output Level)
NS (Noise Suppressor): This effect reduces the noise and hum.
Effect On/Off (Effect On/Off)
Threshold (Threshold) *
Release (Release)
* High settings for the Threshold parameter may result in there being no sound when you play with your instruments volume turned down.
180
Noise
Compressor Equalizer Suppressor
Compressor PreAmp Speaker
Modeling
Setting Function
OFF, ON This parameter turns the compressor effects on/off.
0–100 Adjusts the range (time) over which low-level signals are boosted. Larger
values will result in longer sustain.
0–100 Adjusts the strength of the attack. Larger values will result in a sharper
attack, creating a more clearly defined sound.
0–100 Adjusts the volume.
OFF, ON This parameter turns the equalizer effect on/off.
-20–+20 dB This parameter sets the gain (amount of boost or cut) for the bass
equalizer.
-20–+20 dB This parameter sets the gain (amount of boost or cut) for the low-midrange
equalizer.
100–10.0 kHz This parameter sets the central frequency for the low-midrange equalizer.
0.5–16 This parameter sets the range of change in gain for the frequency set by
"Low-Mid Freq." A larger value results in a narrower range of change.
-20–+20 dB This parameter sets the gain (amount of boost or cut) for the high-midrange
equalizer.
100–10.0 kHz This parameter sets the central frequency for the high-midrange equalizer.
0.5–16 This parameter sets the range of change in gain for the frequency set by
"High-Mid Freq." A larger value results in a narrower range of change.
-20–+20 dB This parameter sets the gain (amount of boost or cut) for the treble
equalizer.
-20–+20 dB This parameter adjusts the volume after the equalizer stage.
OFF, ON This parameter turns the noise suppressor effect on/off.
0–100 Adjust this parameter as appropriate for the volume of the noise. If the
noise level is high, a higher setting is appropriate. If the noise level is low,
a lower setting is appropriate. Adjust this value until the decay of the sound
is as natural as possible.
0–100 Adjusts the time from when the noise suppressor begins to function until
volume reaches "0."
Delay
Delay
Noise
Suppressor