Completing Your Original Cd-Cd Burning; Writing To A Cd-R Disc; Finishing The Cd Burning - Roland DiscLab CDX-1 Owner's Manual

Completing your original CD—CD Burning
Here's how to write the mixed-down song to a CD-R disc to complete your own
original CD.
When you create an original CD on the CDX-1, you will use the "mastering tools"
to adjust the overall volume to the optimal level.
* The CDX-1 uses Track At Once to write song data to a CD-R disc. A CD-R disc that was written
using Track At Once allows additional song data to be written as long as you have not yet
finalized the disc. However, the disc cannot be played in a conventional CD player until it has
been finalized. Once a CD-R disc has been finalized, no further data can be written to it.

Writing to a CD-R disc

1. When the "Do you want to burn a CD?" message appears in step 5 of "Mixing
down" (p. 133) or step 5 "Listen to the result of Mixing down"(p. 133), press [YES/
ENTER].
A message of "Save SONG before eject?" appears.
If you wish to save, press [YES/ENTER].
A message of "Processing..." appears and CDX-1 saves setting of SONG (Parameter
of Mixer, effects etc.) in CD-RW disc. When saving is completed, the disc tray will
open, the screen indicates "Insert CD-R disc."
If you press [NO/EXIT], CDX-1 will not save setting of SONG (Parameter of Mixer,
effects etc.) in CD-RW disc. The disc tray will open, the screen indicates "Insert
CD-R disc."
2. Remove the CD-RW disc and insert a CD-R disc.
fig.43-05
The CD burning screen appears.
CD RECORDER [
ready mode).
* You can select the mastering tools patch and adjust the input level in CD burning screen before
writing to the CD-R disc. However, you can not test-listening
3. Press PLAY [
].
Writing to the CD-R disc will begin.
When writing is completed correctly, the screen will ask "Do you want to finalize a
CD?"
4. If you wish to finalize the disc, press [YES/ENTER].
The screen will indicate "Now Processing...," and the disc will be finalized. When
finalization is completed, the disc tray will open.
If you wish to add another song, press [NO/EXIT]. Finalize will not be executed, and
the disc tray will open.

Finishing the CD Burning

1. Press [CD BURNING] or [NO/EXIT].
A message of "You'll lose MASTER TR. Are you sure?" appears.
2. Press [YES/ENTER], CD burning mode will finish.
[CD BURNING] will go dark.
Press [NO/EXIT], stay on CD burning mode.
Editing a recorded performance to create an audio CD
] will blink (writing-
.
For details on the mastering
tools, refer to "Adjusting the
mastering tools" (p. 134)
Track At Once (p. 18),
Finalize (p. 204)
For details of saved Song
settings, refer to "Saving Song
settings on a CD-RW disc"
(p. 126).
Data is written to the CD-R
disc at 1x speed.
If you wish to add other songs
to the CD-R disc and execute
Finalize later, refer to
"Finalizing a CD-R disc"
(p. 136).
Finalization will require
approximately 1 minutes.
135