Control Change Map Settings - Roland SN- 700 Owner's Manual

Control Change Map settings
Control Change messages transmitted from an external MIDI
device can be used to turn the following functions on/off.
Here's how to specify the controller number that will contro!
each SN-700 function.
* For each controller number, data values above the median (64 -
127) will turn the function on, and data values below the median
(0 — 63) will turn the function off. For functions which adjust a
level, the data value will change the level.
Control Change Map paramefters
[NC-A:ON/OFF: Noise cancel A on/off]
(OFF, 1 — 31, 64 - 95)
Specify the controller number that will turn Noise Cancel
channel A on/off.
SYSICTRL CHG MAP
OFF +HC-At ON/OFF
[NC-A:AUTO: Noise cancel A Auto]
(OFF, 1 — 31, 64 - 95)
Specify the controller number that will initiate the Auto
function for Noise Cancel channel A. The Auto function will
operate when the received data value is higher than the
median.
SYStCTRL CHa MAP
OFF #HC-HiRUTO
[HC-A:ON/OFF: Hum cancel A on/off]
(OFF, 1 -— 31, 64 - 95)
Specify the controller number that will turn Hum Cancel
channel A on/off.
S¥YSICTRL CHG MAP
MFP +HO~AD OHA OFF
36 Editing system paremeters
{[HC-A:AUTO: Hum cancel A Auto]
(OFF, 1 — 31, 64 — 95)
Specify the controller number that will initiate the Auto
function for Hum Cancel channel A. The Auto function will
operate when the received data value is higher than the
median.
S¥S:CTRL CHG MAP
OFF +HC-A: AUTO
[NC-B:ON/OFF: Noise cancel B on/off]
(OFF, 1 - 31, 64 — 95)
Specify the controller number that will turn Noise Cancel
channel B on/off.
SYS!ICTRL CHG MAP
OFF +HC-B? OM"0FF
[NC-B:AUTO: Noise cancel B Auto]
(OFF, 1 - 31, 64 — 95)
Specify the controller number that will initiate the Auto
function for Noise Cancel channel B. The Auto function will
operate when the received data value is higher than the
median.
[HC-B:ON/OFF: Hum cancel B on/off]
(OFF, 1 — 31, 64 — 95)
Specify the controller number that will turn Hum Cancel
channel B on/off.
SYS@CTRL CHG MAF
OFF +HC-B: OH-OFF
{HC-B:AUTO: Hum cancel B Auto]
(OFF, 1-31, 64 - 95)
Specify the controller number that will initiate the Auto
function for Hum Cancel channel B. The Auto function will
operate when the received data value is higher than the
median.
SVEICTRL CHG MAP
OFF +HC-B:QuTO