Cueing To A Precise Location-Preview; Adjusting The Current Location While Listening To The Preceding And/Or Following Sound - Roland DiscLab CDX-1 Owner's Manual

Cueing to a precise location—Preview
When you are editing the performance of an audio track or sequence track, there are
times when you need to determine a precise editing location, such as the beginning
of a specific sound or the point where a break begins. By using the Preview function
you can search for the desired point while listening to the sound, and adjust the
location with great precision.
Adjusting the current location while listening to the
preceding and/or following sound
fig.5-01e
1second
PREVIEW
TO
1. For the audio track whose sound you wish to check, press [STATUS] to make it
light in green.
To play back a sequence track, turn [SEQ PLAY] on. Then in the Sequence Play List
screen, select the sequence track (A–D) that you wish to play. (
track"; p. 96)
2. With playback stopped, press PREVIEW [TO] or [FROM] to play back the sound
as described below.
Press [TO]:
Playback once from one second before the current location to the current location.
Press [FROM]:
Playback once from the current location to one second after the current location.
3. While listening to the sound, turn the TIME/VALUE dial to make fine
adjustments to the current location.
Now Time
Sound data
1second
PREVIEW
FROM
More functions for the CDX-1
Time
"Playing a sequence
[TO] is convenient when you
wish to set the current location
to the beginning of a sound,
and [FROM] is convenient
when you wish to set the
current location to the end of a
sound.
For an audio track, you can
press [MARK] to mark the
current location so that it can
be easily found later.
"Assigning a marker" (p. 129)
139