Roland CD-2e Owner's Manual

The CD-2e makes it easy to capture your performances and write them to an audio CD. In Section 1,
we'll show you how to use the CD-2e's built-in microphone to record a performance to an SD memory
card. Then, in Section 2, we'll show you how to write your recorded performance onto a CD.
Let's Record to
an SD Memory Card
1 Connect the included power cord to the dedicated AC adaptor.
Insert the SD memory card into the card
slot on the left side panel.
(An SD memory card is included in the CD-2e box.)
Firmly insert the
card all the way.
Set the two switches on the left side.
Set the [MIC SELECT] switch to the "INT"
1
position.
Set the [MIC LEVEL] switch to the "MANUAL"
2
position.
While producing the sound that you'll
actually be recording, turn the [MIC] knob
to adjust the input level.
Adjust the level so that the peak indicator located above
the [MIC] knob lights briefly at the loudest moments of
the performance or vocal you'll be recording.
Quieter Louder
Peak indicator
Copyright © 2007 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
2
Dedicated AC Adaptor (included)
When the CD-2e recognizes
the card, the following screen
is displayed:
Media to
Prepare
On the CD-2e's rear panel, move
the [POWER] switch to the "ON" position.
Power cord (included)
Press the [ (Record)] button.
Blink
Press the [
Lit
Press the [ (Stop)] button.
Turn off
Press the [ ] [
the desired song.
Press the [
to start and stop playback.
* To record additional performances, repeat Steps 4–7.
Once you've finished recording, proceed to the
other side of this sheet to learn how to write a CD.
●
For additional details on recording using the built-in
microphone, see page 36 of the CD-2e Owner's Manual.
SD memory card
To power outlet
* The shape of the power cord's plug varies
depending on the country.
The button's light blinks red,
indicating that the CD-2e is
standing by for recording.
(Play)] button.
The CD-2e starts recording.
Begin your performance.
The CD-2e stops recording.
] buttons to select
(Play)] [ (Stop)] buttons