Stereo Delay - Roland SBX-1000 Owner's Manual

15: STEREO DELAY

This is a stereo delay.
Knob Parameter
Left BPM Sync
Left Time
Right BPM Sync
Right Time
Phase Left
Phase Right
Feedback Mode
[Knob 1] Feedback
HF Damp
Wet Low Gain
Wet High Gain
[Knob 2] Level
16: 3TAP PAN DELAY
Produces three delay sounds; center, left and right.
Knob Parameter
Delay BPM Sync
Left/Center/Right
Time
Center Feedback
HF Damp
[Knob Left/Center/Right
1/2/3] Level
Wet Low Gain
Wet High Gain
Level
10
Value Explanation
OFF, ON OFF: Left Time specified as numerical value
ON: Left Time specified as note value
0–1300 msec, note Adjusts the time until the delay sound is heard.
OFF, ON OFF: Right Time specified as numerical value
ON: Right Time specified as note value
0–1300 msec, note Adjusts the time until the delay sound is heard.
NORMAL, INVERSE Phase of the delay sound
NORMAL, INVERSE Phase of the delay sound
NORMAL, CROSS Selects the way in which delay sound is fed back into the effect.
-98–+98 % Adjusts the amount of the delay sound that's fed back into the effect. Negative (-)
settings invert the phase.
200–8000 Hz, BYPASS Adjusts the frequency above which sound fed back to the effect is filtered out
(BYPASS:no cut).
-15–+15 dB Amount of boost/cut for the effect sound's lower range
-15–+15 dB Amount of boost/cut for the effect sound's upper range
0–127 Output level
Value Explanation
OFF, ON OFF: Left/Center/Right Time specified as numerical value
ON: Left/Center/Right Time specified as note value
0–1300 msec, note Adjusts the time from the original sound until the left, right, and center delayed
sounds are heard
-98–+98 % Adjusts the amount of the delay sound that's fed back into the effect. Negative (-)
settings invert the phase.
200–8000 Hz, BYPASS Adjusts the frequency above which sound fed back to the effect is filtered out
(BYPASS:no cut).
0–127 Volume of each delay
-15–+15 dB Amount of boost/cut for the effect sound's lower range
-15–+15 dB Amount of boost/cut for the effect sound's upper range
0–127 Output level