tecan HYDROFLEX PLUS Instructions For Use Manual page 31

Firmware Commands on the Display (in alphabetical order)
DISPLAY
ASP.RATE #
ASPIRATE
BOTTOM POS.
BUBBLE ERROR
BUBBLE HIGH
BUBBLE LOW
BUBBLE MEDIUM
BUBBLE OFF
BUBBLE SENSOR
BURN IN TEST
C# CYCLE
C# CYCLEEND
C# P# ASP
C# P# CYCLE
C# P# CYCLEEND
C# P# DISP
C# P# SOAK
C# P# USER PR.
C# P# WASH
CH# PRIMED?
CHANNEL #
CLEAN NO
CLEAN YES
CLEAR
CLEAR: #
CLR
CLR CHANNEL 1
CLR CHANNEL 2
CLR CHANNEL 3
CLR CHANNEL 4
CLR VAC.WASTE
CLR WASTE 1
Crossw.Asp NO
Crossw.Asp YES
CYCLE NO #
CYCLE NO #
DEFINE EDIT
DISPENSE
DISPENSE POS.
EDIT LLD CHANNEL
2022-01
Meaning...
Aspiration rate #
Aspirate
Bottom position
Bubble error
Bubble high
Bubble low
Bubble medium
Bubble OFF
Bubble sensor
Burn in test
C# Cycle
C# Cycle End
C# P# Aspirate
C# P# Cycle
C# P# Cycle end
C# P# Dispense
C# P# Soak
C# P# User Prompt
C# P# Wash
Channel# primed?
Channel #
No cleaning
Cleaning
Clear
Clear: #
Clear
Clear channel 1
Clear channel 2
Clear channel 3
Clear channel 4
Clear vacuum waste
Clear waste 1
Crosswise Aspiration no
Crosswise Aspiration yes
Cycle number #
Cycle number #
Define Edit
Dispense
Dispense position
Edit LLD channel
HYDROFLEX PLUS No. 30199906 Rev. No. 1.1
4. Operating Instructions
DISPLAY
EDIT PLATES
EMPTY BOTTLES
EMPTY PRIMETRAY
FINAL ASP?
FINAL ASPIRATE
FL.RATE # ul/s
FL.RATE DRIP
H-SPEED # mm/s
HYDROFLEX
INIT
INIT ERROR
INV CMD
INV PARAMETER
LIQUID BOTTLE OK
LLD ERROR
LLD OFF
LLD ON
LOCKED
MANIFOLD BROKEN
MANIFOLD DETECT
MANIFOLD UP
MISS. PARAMETER
MOVE CUSTOM
MOVE MANIFOLD
MOVE OVERFLOW
MOVE TRANSPORT
NAME:
NO PLATE
NO PLATE FOUND
NO PROGRAM
NO PROGRAM FOUND
NO. OF CYCLES #
NOT DEF
OPTIONS
OVERFLOW POS.
PARAMETER RANGE
PLATE
Plate #
PLATE INSERTED?
PLATE MODE
Meaning...
Edit plates
Empty bottles
Empty prime tray
Final aspiration?
Final aspiration
Flow rate # ul/s
Flow rate Drip
Head speed: # mm/s
HYDROFLEX
Initialize
Initialization error
Invalid command
Invalid parameter
Liquid bottle OK
LLD Error
LLD OFF
LLD ON
locked
Manifold broken
Manifold detection
Manifold up
Missing parameter
Move custom
Move manifold
Move overflow
Move transport
Name:
No plate
No plate found
No Program
No program found
Number of cycles #
Not defined
Options
Overflow position
Parameter range
plate
Plate #
Plate inserted?
Plate mode
31