General; Introduction - tecan HYDROFLEX PLUS Instructions For Use Manual

2.

General

2.1

Introduction

2022-01
The HYDROFLEX PLUS is an instrument for strip-wise processing of microplates
in the 96-well format. The instrument is designed for professional use only and
should only be operated by trained personnel.
THE WASH RESULTS OBTAINED WITH THE HYDROFLEX PLUS ARE
INFLUENCED BY THE CORRECT USE OF THE INSTRUMENT,
ACCORDING TO THE INSTRUCTIONS GIVEN IN THIS IFU, AS WELL AS
THE LIQUID COMPOUNDS USED (REAGENTS, WASH BUFFER,
CHEMICAL COMPONENTS). THE INSTRUCTIONS FOR USE, STORAGE,
AND OTHER HANDLING IN CONNECTION WITH SAMPLES OR
REAGENTS MUST BE STRICTLY FOLLOWED. TAKING THESE FACTS
INTO CONSIDERATION, RESULTS MUST BE INTERPRETED
BEFORE THE INSTRUMENT IS INSTALLED AND SWITCHED ON
IT SHOULD BE LEFT TO STAND FOR AT LEAST THREE HOURS, SO
THERE IS NO POSSIBILITY OF CONDENSATION CAUSING A SHORT
BEFORE WASHING PROCEDURES ARE STARTED, MAKE SURE THAT
THE MICROPLATE POSITION A1 IS INSERTED CORRECTLY.
HYDROFLEX PLUS No. 30199906 Rev. No. 1.1
CAUTION
CAREFULLY.
CAUTION
CIRCUIT.
CAUTION
2. General
15