Programming Procedure; Introduction; Program Menu - tecan HYDROFLEX PLUS Instructions For Use Manual

5.

Programming Procedure

5.1

Introduction

5.2

Program Menu

PROGRAM
< > OK
START
< > EXIT OK
2022-01
The following program items are available:
CYCLE The number of cycles the subsequent processing steps
should be performed
ASP An aspirate step removes liquid from the wells.
DISP A dispense step fills the wells with liquid.
WASH Liquid is dispensed and aspirated simultaneously
creating a circular flow with a maximum volume of 3000
µl in one wash step for increased wash efficiency.
SOAK During a soak step the liquid remains in the wells for the
set time (with or without shaking).
USER PROMPT User interaction is requested.
FINAL ASPIRATE An aspirate step at the end of a program.
END PROGRAM The program finishes.
The Program menu has the following options:
Start Run a defined wash program.
Define/Edit Define or edit a program on the instrument.
Show View the parameters of a defined program.
Clear a wash program from the instrument's menu.
Clear
The Program menu has the following structure:
DEFINE EDIT
< > EXIT OK
HYDROFLEX PLUS No. 30199906 Rev. No. 1.1
5. Programming Procedure
SHOW
< > EXIT OK
CLEAR
< > EXIT OK
39