Options Submenu; Bubble Sensor - tecan HYDROFLEX PLUS Instructions For Use Manual

6. Settings Menu
6.1.2

Options Submenu

Edit LLD Channel
6.1.3

Bubble Sensor

50
The Options submenu has the following structure:
OPTIONS
< > OK
EDIT LLD CHANNEL
- + EXIT OK
* Depending on available options
EDIT LLD CHANNEL
- + EXIT OK
SET WASTE 1
- + EXIT OK
SET VAC. WASTE
- + EXIT OK
SET CHANNEL 1
- + EXIT OK
SET CHANNEL 2
- + EXIT OK
EDIT PLATES
- + EXIT OK
BUBBLE SENSOR
- + EXIT OK
BUBBLE OFF
- + EXIT OK
HYDROFLEX PLUS No. 30199906 Rev. No. 1.1
...*
- + EXIT OK
Press OK to continue.
Press OK to activate LLD sensor for Waste 1.
"CLR WASTE 1" will appear when the sensor is
active. Press OK again to deactivate.
Press + to move to the next sensor.
Press OK to activate LLD sensor for Vacuum
Waste. "CLR VAC. WASTE" will appear when the
sensor is active. Press OK again to deactivate.
Press + to move to the next sensor.
Press OK to activate LLD sensor for Channel 1.
"CLR CHANNEL 1" will appear when the sensor is
active. Press OK again to deactivate.
Press + to move to the next sensor.
Press OK to activate LLD sensor for Channel 2.
"CLR CHANNEL 2" will appear when the sensor is
active. Press OK again to deactivate.
Press + to move to the next sensor.
Press EXIT when all sensors are set as desired.
Press OK to continue.
Press – or + to select between
OFF, LOW, MEDIUM and HIGH.
Press OK to confirm.
2022-01