Clear Program - tecan HYDROFLEX PLUS Instructions For Use Manual

5.4

Clear Program

2022-01
This submenu is used to clear a program from the instrument's memory.
CLEAR
< > EXIT OK
CLR PROGR 1:A
< > EXIT OK
CLR PROGR 1?
NO YES
A: DELETED
If the program is locked it cannot be cleared and the following message is
displayed:
PROGRAM IS
LOCKED
The program can only be unlocked via the HydroControl software, by users with
the appropriate rights.
HYDROFLEX PLUS No. 30199906 Rev. No. 1.1
5. Programming Procedure
Press OK to enter the CLEAR
menu.
Select the program to be deleted
from the instrument's memory
(Program Position: Program Name)
Confirm that selected program
is to be deleted
CLR (Program Position) ?
The name of the program which
has been deleted appears
(Program Name: DELETED)
47