Memory Card; Figure 30. Memory Card Location - Deckma Hamburg OMD-2008 Series Instruction Manual

15ppm bilge alarm
Hide thumbs Also See for OMD-2008 Series:
Table of Contents

Advertisement

15.

Memory Card

Figure 30. Memory Card Location

1. Display PCB
2. Memory Card
The Memory Card is on the backside of the Display PCB inside the computer housing. It is
sufficient for the life of the instrument, and it ensures to the required storage time of at
least 18 months according to MEPC.107(49). When the card is completely used, the oldest
entry will be overwritten, so that a replacement is not necessary. Under normal use the
card should not be taken out. The memory card is registered with the specific instrument.
The card can be read in other OMD-2008 units, but writing is only possible in the related
system.
If no memory card is mounted, if the memory card is defective, or a card from another
system is inserted, the unit will be in alarm condition "Status: Datalog".
Page: 58 of 102

Advertisement

Table of Contents
loading

Table of Contents