Functional Buttons Al1/ Al2/ Set - Deckma Hamburg OMD-2008 Series Instruction Manual

22.2.3 Functional Buttons AL1/ AL2/ SET

Pressing "AL1", "AL2", or "SET" button leads into the "SETTINGS, def" menu. At the SETTINGS, def." menu the alarms,
time delays, the offset, the gain, and the output signal can be modified within the limitation. And the unit could be
also reset to factory default values there. Pressing the "SET" button in the "SETTINGS, def." menu leads into the
particular values, where the limitation can be adjusted.
Page: 75 of 102
Select the required point by
using the "+" or "-" button
and confirm with the "OK"
button.
Select the required point by
using the "+" or "-" button
and confirm with the "OK"
button.
Select the required point by
using the "+" or "-" button
and confirm with the "OK"
button.
Select the required point by
using the "+" or "-" button
and confirm with the "OK"
button.