Navigation Buttons - Deckma Hamburg OMD-2008 Series Instruction Manual

22. Appendix I.

22.1 Navigation Buttons

Pressing one of the tagged
buttons, let the
Operation" display appears.
 Refer to Fault Finding Table in manual for explanation of status information.
"Normal
or
Page: 71 of 102
Pressing the "+" button
displays additional
information about measuring
value.
Pressing the "-" or "OK"
button leads into the "Fault
Condition".
By pressing the "-" or "OK"
button, if no sample is in the
Measuring Cell, an error will
appear.
Pressing the "-" button twice
after the initializing display
appears, will point out, if
fresh water is open.