System Settings; Auto Clean Control Unit; Figure 25. Auto Clean Control Unit - Deckma Hamburg OMD-2008 Series Instruction Manual

11.4 System Settings

At commissioning, alarm set points and alarm delays can be set. The signal output can be
modified from 0 – 20 mA or 4 to 20 mA. According to external requirements also the offset
can be set from -5 ppm to 5 ppm. Also, the settings can be reset to the factory default
values, if needed.
For more information about the Settings, see 22.2.3
.
SET

11.5 Auto Clean Control Unit

Figure 25. Auto Clean Control Unit

A. Air Regulator
B. Air Flow Adjuster
C. Air Regulator Hose
D. Air Flow Adjuster Hose
E. Wiper Piston
F. Transparent
separator)
G. Ø 40mm Pressure Gauge
Page: 48 of 102
Functional Buttons AL1/ AL2/
Bowl (Filter with water