Usage Of This Instruction Manual; Disposal; Symbols - Deckma Hamburg OMD-2008 Series Instruction Manual

Usage of this instruction manual

This instruction manual will guide you how to use the OMD-2008 Series. The instruction
manual is split into sections. Every section handles a specific part of the OMD-2008 Series.
The first section gives you general information about safety before using and servicing the
OMD-2008 Series. Please take notice on this section.
You will also find information about the construction and the installation of OMD-2008
Series. The programming mode is explained in detail at the end of the instruction manual.
This instruction manual also contains information about the service support and our
contact details. The symbols below will accompany for a better understanding.

Disposal

The crossed-out waste container icon on waste electrical or electronic device indicates
that this device must not be disposed of with household waste at the end of its life. There
are collection points available in your area for free. The addresses can be obtained from
your municipality or local administration. You can also email us at
find out further return options provided by our company.
Separate collection of waste electrical and electronic equipment (WEEE) is intended to
prevent the re-use, recycling other forms of use of WEEE as well as to avoid adverse
effects on the environment and human health from the disposal of potentially hazardous
substances contained in devices.

Symbols


This symbol is used for giving general advices.
i
This symbol is used to clarify a recommendation.

This symbol is used for giving advice about servicing.
This symbol is used to draw warning against hand injuries.
This symbol is used to show electrical voltage warnings.
This symbol is used to draw attention to hot surfaces.
This symbol is used for giving general warnings.
This symbol is used to draw attention to hazardous substances.
Page: 1 of 102
post@deckma.com to