Construction Omd-2008 Eva; Figure 10. Construction Omd-20008 Eva - Deckma Hamburg OMD-2008 Series Instruction Manual

6.2

Construction OMD-2008 EVA

The OMD-2008 EVA consists of a Computer Unit, and a Measuring Cell, which is equipped
with an EV-Valve and Automatic Cell Cleaning Device. Additionally, the components of the
OMD-2008 EVA are mounted onto three separate supports.
The Automatic Cell Cleaning Device is electrically inserted between the Computer Unit
and the Measuring Cell. The cable length is limited to typical about 1 m. The cable is
connected with the Measuring Cell as well as with the Automatic Cell Cleaning Device
consecutively.
The Automatic Cell Cleaning Device additionally needs a sufficient supply of dry, clean
instrumentation air.

Figure 10. Construction OMD-20008 EVA

1. Computer Unit
2. Measuring Cell
3. Electric Valve
4. EV Valve
Connection Cable
5. EV Support
6. Automatic Cell Cleaning
Device
7. Desiccator Cap
8. Communication Cable
(Measuring Cell)
9. Communication Cable
(Automatic Cell Cleaning
Device)
Page: 30 of 102
10. Autoclean Controller
11. Air Regulator
12. Air Flow Adjuster
13. Air Supply for Regulator
14. Air Supply for Cylinder