Piping Omd-2008 Eva; Figure 12. Piping Omd-2008 Eva - Deckma Hamburg OMD-2008 Series Instruction Manual

6.4

Piping OMD-2008 EVA

Connect the Sample line to the left side input of the OMD-2008 EVA. Connect the clean
water line to the right-hand side input of the valve. Both inputs have 1/4" female threads.
It Is recommended to employ 6 mm OD copper or stainless-steel pipe. If it is possible,
install a manual valve into the clean water line next to the OMD-2008 EVA. For Air
Regulation connect the air pipe to the Unit and the Measuring Cell. The air supply should
be of 4 to 6 bar.

Figure 12. Piping OMD-2008 EVA

Page: 32 of 102