Table of Contents
Advertisement
12.4 System Settings
At commissioning, alarms set points and alarm delays can be set. The signal output can
be modified from 0 – 20 mA or 4 to 20 mA. According to external requirements also the
offset can be set from -5 ppm to 5 ppm. Also, the settings can be reset to the factory
default values, if needed.
For more information about the Settings, see 23.2.3
SET.
12.5 Auto Clean Control Unit
Figure 26. Auto Clean Control Unit
A. Air Regulator
B. Air Flow Adjuster
C. Air Regulator Hose
D. Air Flow Adjuster Hose
E. Wiper Piston
F.
Transparent Bowl (Filter with water separator)
G. Ø 40mm Pressure Gauge
Page: 56
Functional Buttons AL1/ AL2/
Advertisement
Chapters
Table of Contents
