Deviser S7000 Operation Manual page 94

Positioner
SaTCR command SaTCR SaTCR SaTCR command command command list list list list:
SaTCR STATUS
NUM OF SLOTS
SELECT SLOT
SLOT STATUS
SaTCR A/B
SLOT1
SLOT2
----
----
SLOT8
NOTE: S7000 supports supports 8 8 8 8 slot
NOTE: S7000 NOTE: NOTE: S7000 S7000 supports supports
4.5.2 4.5.2 Operation Operation
4.5.2 4.5.2 Operation Operation
� SaTCR SaTCR
SaTCR SaTCR Press this key to switch between DiSEqC and SaTCR.
�
Press
�
In DiSEqC function, press
86
S7000 TV Analyzer
HALT
DISABLE LIMITS
ENABLE LIMITS
SET LIMIT EAST
SET LIMIT WEST
DRIVE EAST SEC
DRIVE EAST STEPS
DRIVE WEST SEC
DRIVE WEST STEPS
STORE POSITION
GOTO POSITION
GOTO X.X°
GOTO 0
Table 4-1
Command
Table 4-2
slot maximum.
slot slot maximum. maximum. maximum.
UP/DOWN
keys (UP/DOWN UP/DOWN) to select command/parameter. UP/DOWN
Operation Manual
Parameter
ENABLE / Enable or disable the
DISABLE SaTCR function.
Num of SaTCR LNB
2 / 4 / 8
channels
Selected
1 to 8
channel.
ON / OFF Set the channel status
A / B Switch SaTCR LNB
950MHz~
Channel frequency
2150MHz
950MHz~
Channel frequency
2150MHz
---- ----
---- ----
950MHz~
Channel frequency
2150MHz
LEFT LEFT RIGHT RIGHT
keys (LEFT LEFT/RIGHT RIGHT) to adjust command parameters.
----
----
----
----
----
1 to 127
1 to 127
1 to 127
1 to 127
1 to 255
1 to 255
-80° to 80°
----
Description
SaTCR