Deviser S7000 Operation Manual page 80

Main menu of satellite system is shown in Figure 4-1.
The function icons of the main menu are defined as follows:
----
----
----
----
----
LEFT LEFT
Press keys (LEFT LEFT/RIGHT
to enter the relevant interfaces.
S7000 will display the satellite name in use on the title bar, as shown in Figure 4-1. "AP5" is the satellite
name in use.
Before testing, users need to select the satellite first by press
function is as in Figure 4-2. Press F1
(TP +) +) +) +) or F4 (TP F4 (TP -) -) -) -) to switch transponders. (TP
(TP (TP F4 (TP F4 (TP
CH CH EDIT EDIT
In CH CH EDIT EDIT interface, user can only switch the satellite plans enabled in satellite list (See Section 2:
SETUP->CHANNEL->SATELLITE SETUP->CHANNEL->SATELLITE SETUP->CHANNEL->SATELLITE SETUP->CHANNEL->SATELLITE LIST
72
S7000 TV Analyzer
Measurement
Constellation diagram measurement
Spectrum analysis
Dish Align
DiSEqC
RIGHT RIGHT
RIGHT) to select the relevant function icons, and you can press
F1 F1 (SAT F1 (SAT +) +) +) +) or F2 (SAT (SAT
LIST LIST). LIST
Operation Manual
Figure 4-1
F2 F2 (SAT F2 (SAT (SAT -) -) -) -) to switch satellite plans and also press F3 (SAT
key (ENTER
key (CH CH CH INFO CH INFO INFO) and the CH INFO
ENTER ENTER
ENTER)
CH CH EDIT CH EDIT EDIT EDIT
F3 F3 F3