Deviser S7000 Operation Manual page 29

2.1.5 2.1.5 2.1.5 2.1.5 Channel Channel Channel Channel Settings Settings Settings Settings
CHANNEL
Select the CHANNEL CHANNEL CHANNEL Tab to display and adjust the channel settings. The following settings are included
CHANNEL CHANNEL
in the CHANNEL CHANNEL Tab.
�
Selecting an Active User Channel Plan
�
Learning a User Channel Plan
�
Editing a User Channel Plan
�
Editing a Tilt Measurement Channel Plan
�
Satellite List
�
Adding Satellite
2.1.5.1 2.1.5.1 Select Select User User
2.1.5.1 2.1.5.1 Select Select User User Channel
Up to sixteen user channel plans can be built and saved. The user channel plans are labeled as
[UsrPlan00] through [UsrPlan15] and the user can select only one user channel plan as the active plan.
S7000 will measure according to the parameters and settings entered in the selected user channel plan.
To select the active user channel plan, perform the following steps:
UP UP DOWN DOWN
Select keys (UP UP/DOWN DOWN/LEFT
After selecting the plan, use the Alphanumeric Keypad to enter the user channel plan name (if desired),
as shown in the Figure 2-16.
2.1.5.2 2.1.5.2 2.1.5.2 Learn 2.1.5.2 Learn User Learn Learn User User Channel User Channel Channel Channel Plan
Before attempting to use S7000, the user must create a User Channel Plan. Once completed, this will
allows S7000 to measure all the channels automatically and save the various measurement data.
Perform the following steps to learn a User Channel Plan:
Connect S7000 to the cable system.
UP UP
1) Select keys (UP UP/DOWN
UP
2) Select keys (UP UP/DOWN UP
S7000 TV Analyzer
Channel Channel Plan Plan
Channel Plan Plan
LEFT LEFT RIGHT RIGHT
LEFT/RIGHT RIGHT) and
Plan Plan Plan
DOWN DOWN
DOWN) to select the LEARN
DOWN
DOWN DOWN) to select the type of user channel plan from CCIR, NCTA, OIRT and
Operation Manual
ENTER ENTER
key (ENTER ENTER) to select the desired user channel plan.
Figure 2-16
LEARN LEARN USER USER PLAN PLAN
LEARN USER USER PLAN PLAN, as shown in Figure 2-17.
21