Deviser S7000 Operation Manual page 19

2.1.3 2.1.3 General General Settings Settings
2.1.3 2.1.3 General General Settings Settings
Select the GENERAL GENERAL GENERAL GENERAL Tab to display and adjust the general system settings. The following settings are
included in the GENERAL GENERAL GENERAL GENERAL Tab, as shown in the Figure 2-3.
�
Network Settings
� Display and Battery Settings
�
Date and Time Settings
�
Skin Settings
� Language Settings
�
Operator Name
�
Factory Reset
2.1.3.1 Network Settings
2.1.3.1 2.1.3.1 2.1.3.1 Network Network Settings Network Settings Settings
Users may access network with RJ45 connection.
�
Automatic Network Parameters, refer to Figure 2-3.
To enable automatic network parameters sent from a DHCP server, perform the following steps:
UP UP
1) Select keys (UP UP/DOWN
2) Select key (ENTER ENTER) to select the check box. ENTER ENTER
3) Once the DHCP check box is selected, the IP Address, Net Mask, Gateway, and DNS will all be
assigned by the DHCP server and can not be manually adjusted.
S7000 TV Analyzer
DOWN DOWN LEFT LEFT RIGHT RIGHT
DOWN/LEFT LEFT/RIGHT RIGHT) to highlight the DHCP check box.
Operation Manual
Figure 2-2
11