Deviser S7000 Operation Manual page 24

2.1.3.6 2.1.3.6 Operator Operator Name Name
2.1.3.6 Operator 2.1.3.6 Operator Name Name
The operator name and company can be entered into S7000 as shown in the Figure 2-10.
UP UP DOWN DOWN
Select keys (UP UP/DOWN DOWN/LEFT
names. After saving, the desired name will be displayed.
NOTE: The NOTE: NOTE: NOTE: The The The operation operation operation operation system
2.1.3.7 2.1.3.7 2.1.3.7 2.1.3.7 Factory Factory Factory Factory Reset Reset Reset Reset
The Factory Reset allows the user to restore the factory default setup.
2.1.4 2.1.4 Measurement Measurement
2.1.4 2.1.4 Measurement Measurement Settings
MEASURE
Select the MEASURE MEASURE Tab to display and adjust the measurement settings. The following settings are MEASURE
MEASURE MEASURE
included in the MEASURE MEASURE Tab.
� HUM Settings
� Level Shift Settings
�
ANALOG TV Limit Settings
� DVB-C Limit Settings
� DVB-T Limit Settings
�
DVB-S/S2 Limit Settings
� Display Format
2.1.4.1 2.1.4.1 HUM HUM Settings Settings
2.1.4.1 2.1.4.1 HUM HUM Settings Settings
S7000 supports HUM measurement to ANALOG channel. HUM modulation is also named as power
HUM modulation distortion, which caused by low-frequency interference of the power. Select
UP UP DOWN DOWN LEFT LEFT RIGHT RIGHT
(UP UP/DOWN DOWN/LEFT LEFT/RIGHT RIGHT) and
2-11.
16
S7000 TV Analyzer
LEFT LEFT RIGHT RIGHT
LEFT/RIGHT RIGHT),
system system could system could could save could save save 20 save 20 20 20 operators
Settings Settings
Settings
ENTER ENTER
key (ENTER ENTER) to select either 50Hz or 60Hz as shown in the Figure
Operation Manual
ENTER ENTER
key (ENTER ENTER) and Alphanumeric Keypad to enter the
Figure 2-10
operators operators operators' ' ' ' information. information. information. information.
keys