Shared Phone - ASCOM d83 Manual

Handset Configuration
1. Select Shortcuts.
2. Select the required shortcut parameter:
− Hot keys 2 through 9 and "Hook Off"
− Soft Keys "Left", "Middle" and "Right"
− Navigation keys "Up", "Down", "Left" and "Right"
− Multifunction buttons
3. Select the Read Only attribute for the selected parameter and from the drop-down menu select:
− False - Retain the default, that is, the selected shortcut remains configurable from the Handset
Shortcuts menu
− True - The shortcut is set read only. The end user is able to select the shortcuts menu and individual
shortcut keys from that menu but is unable to assign a function to the selected key.

5.47 Shared Phone

This feature is applicable for IP-DECT systems only.
The feature Shared phone allows more than one user to use a handset. When a handset is configured as a
shared phone, it can be used by any shared phone user in the system.
Extension and messages are user unique. Messages and call lists are deleted when a user logs off a
handset. Contacts, settings, and Bluetooth devices are common for all shared phone users of the same
handset.
Set Default Master ID
The parameter Default Master ID determines which IP-DECT Master the handset logs on to. In a small IP-
DECT system where a single IP-DECT Master is used, the parameter is not changed (default ID is "0").
In a large IP-DECT system where several IP-DECT Masters are used, the parameter may be changed
depending on which IP-DECT Master to be used.
1. Select Systems → Common → Shared Phone.
2. In the Default Master ID field, change the master ID if needed.
If a user and a shared handset belong to different IP-DECT Masters, the user must override the default
master ID of the shared handset when logging in. Enter the user's Master ID followed by the User ID in the
following format: * <Master ID> * <User ID>
Enable and Disable Shared Phones
The handset will restart after changing the phone mode.
Enabling Shared Phone must be done before assigning an extension to the handset. Either before
subscribing the handset to the IP-DECT system, or before assigning the extension to an
anonymously subscribed handset.
In the WinPDM do the following to enable or disable Shared Phone:
1. Select Systems → Common → Shared Phone.
2. In the Phone mode drop-down list, select one of the following:
60
CONFIGURATION MANUAL
Ascom d83 DECT Handset
TD 93426EN / 28 January 2022 / Ver. C