Allow Or Disallow Incoming Messages; Allow Or Disallow Showing Number On Idle Screen; Allow Or Disallow Connection To Winpdm; Enable Or Disable Led Blinking In Idle Mode - ASCOM d83 Manual

CONFIGURATION MANUAL
Ascom d83 DECT Handset
3. From the drop-down menu associated with the parameter, select one of the following:
− Yes - Retain the default and allow the user to access call functions.
− No - Prevent the user from accessing call functions.
5.15.6

Allow or Disallow Incoming Messages

The handset is enabled, by default, to receive text messages unless explicitly configured not to do so.
Whether or not incoming text message are allowed is determined by the value of the Allow incoming
messages parameter, which is set in the following way:
1. Select Customization → Phone Restrictions.
2. Select the Allow incoming messages parameter.
3. From the drop-down menu associated with the parameter, select one of the following:
− Yes - Retain the default and allow incoming text messages to be received
− No - Disallow incoming text messages from being received.
5.15.7

Allow or Disallow Showing Number on Idle Screen

The handset is enabled, by default, to show the extension number on the idle screen unless explicitly
configured not to do so. Whether or not the extension number is shown is determined by the value of the
Show number on idle screen parameter, which is set in the following way:
1. Select Customization → Phone Restrictions.
2. Select the Show number on idle screen parameter.
3. From the drop-down menu associated with the parameter, select one of the following:
− Yes - Retain the default and show extension number on the idle screen.
− No - Disallow showing the extension number on the idle screen.
5.15.8

Allow or Disallow Connection to WinPDM

The handset is enabled, by default, to establish connection to WinPDM to update device settings unless
explicitly configured not to do so. If connection to WinPDM is restricted, handset settings can be updated
from Device manager. Whether or not connection to WinPDM is allowed is determined by the value of the
Allow connection to WinPDM parameter, which is set in the following way:
1. Select Customization → Phone Restrictions.
2. Select the Allow connection to WinPDM parameter.
3. From the drop-down menu associated with the parameter, select one of the following:
− Yes - Retain the default and allow connection to WinPDM.
− No - Disallow connection to WinPDM. If this setting is configured using WinPDM, it will be applied
after the handset disconnects from the WinPDM application.
5.15.9

Enable or Disable LED blinking in idle mode

The handset can be prevented from blinking in idle mode.
1. Select Customization → Phone Restrictions.
2. In the Allow LED to blink in idle mode drop-down list, select one of the following:
− No - The function is disabled.
− Yes - The LED will blink in idle mode every 3.5 seconds with green color.
TD 93426EN / 28 January 2022 / Ver. C
Handset Configuration
25