ASCOM d83 Manual page 52

Handset Configuration
The handset plays the original message alerts that are mapped to the beep codes.
1. Select Settings → Sound and Alert.
2. In the Message alert drop-down list, select Beeps according to beep code.
Table 4 High beeps according to beep code
Beep code sent from a system/application
Beep code 0
Beep codes 1- 6
Beep code 7
The handset plays the message alerts that are mapped to beep codes but with a higher tone.
1. Select Settings → Sound and Alert.
2. In the Message alert drop-down list, select High beeps according to beep code.
Table 5 Enhanced beeps according to beep code
Beep code sent from a system/application
Beep code 0
Beep codes 1 -3
Beep code 4
Beep code 5
Beep code 6
Beep code 7
The handset plays extended message alerts that are mapped to the beep codes.
1. Select Settings → Sound and Alert.
2. In the Message alert drop-down list, select Enhanced beeps according to beep code.
Table 6 Custom sounds according to beep code
Beep code sent from a system/application
Beep code 0
Beep codes 1- 7
The handset can play customized message alerts that are mapped to beep codes. The message alerts must
first be customized and then mapped to the beep codes.
Customized sounds may also be mapped to enhanced beep codes, as described in
Default Handset Beeps, page
It is recommended to use this feature to create a message alert that sounds like an item of equipment, such
as a respirator, that generates an alarm.
46
72.
The handset plays
No message alert is played
1 - 5, and 10 beeps
Siren
The handset plays
No message alert is played
1 - 3 beeps
3 tones chime
10 beeps
Alarm sweep
Siren
The handset plays
No message alert is played
Corresponding customized sound
TD 93426EN / 28 January 2022 / Ver. C
CONFIGURATION MANUAL
Ascom d83 DECT Handset
A.1 Customize the