Vistalink Pro Interface; System; Figure 4-1: Vistalink Pro - System - evertz 3080UEP Series User Manual

4. VISTALINK
®
4.1.

SYSTEM

The system tab has IP port addresses, system information and common controls which are applicable
to all UEP onboard encoders.
Firmware Version: This parameter returns the firmware version on the card.

Note: For IP address settings on Control and Data ports. After applying any
changes, the UEP must be rebooted for the changes to take. Reboot can be pressed
at the bottom of this System tab after all changes are made.
Control Port
IP Address: Allows user to set the IP Address for the Control Port.
NetMask: Allows user to set the Subnet NetMask for the Control Port.
Gateway: Allows user to set the Gateway for the Control Port.
Professional 3G/HD/SD Universal Contribution Encoding Platform
PRO INTERFACE
Figure 4-1: VistaLINK
Revision 0.2
PRO – System
®
3080UEP Series
Page - 11