BASIC FLOW OF EDITING OPERATIONS
Editing operations basically involve the following steps.
Simple operation mode
1. Edit mode selection
2. Edit point registration
3. Execution of editing
Prepare the editing tape in the recorder.
Select assemble or insert editing.
Set the edit IN and OUT points for the player and recorder.
The points can be checked on the edit data setting display.
Before recording signals on the tape, conduct
a rehearsal and check what is to be edited.
Repeat steps 1 to 2 for a multiple number of events.
Proceed with the automatic editing of one event
or with automatic continuous editing.
After editing, play back and check what was edited.