Panasonic AJ-LT85P Operating Instructions Manual page 56

EDIT DATA DUMPING TO/LOADING FROM AN EXTERNAL DEVICE
<Reference>
Concerning the EDL format
Two data formats are available, the AG-A850 format and the CMX340 format, for transferring edit data (EDL) to a personal com-
puter or other external device.
1) AG-A850: All the edit data in the EDL memory is sent. This means that the edit data can be perfectly restored when the data
which has been output by this unit is loaded again into this unit.
However, the data must be received with EDL AUTO CLR ON selected when events prepared with EDL AUTO CLR ON
selected are to be loaded.
Since no distinction is made in the EDL format between the VIDEO reference and AUDIO reference, the VIDEO reference
should normally be used for the split edit data.
[Example of data output]
TITLE: PANASONIC EDITING CONTROLLER AG-A850(AJ-LT85)
EVENT REEL MODE TYPE
0001 0001 ASMBL C
0002
0001 VA12 C
0003 AUDIO SPLIT
0003 0001 VA12 C
0004 0001 VA12 C
0005 0001 ASMBL C
0006 0001 ASMBL C
0007 AUDIO SPLIT
0007 0001
ASMBL C
0008 0001 ASMBL C
0008 SPEED REEL 0001
0009 0001 ASMBL C
0009 SPEED REEL 0001
0010 0001 ASMBL C
0011D 0001 ASMBL C
0012D 0001 ASMBL
C
0013 AUDIO SPLIT
0013 0001 ASMBL C
0014
0001 ASMBL C
0015 0001 VA12T C
0016 0001 VA12 C
The following restrictions apply when data edited by the AG-A850 is input to this unit.
1. Event numbers
The event numbers are ignored, and one hundred events
are received in sequence starting with the first one.
2. Reel numbers
All reel numbers are received as "0001."
3. Editing mode
A3 and A4 are ignored.
The following restrictions apply when data edited by this unit is input to the AG-A850.
1. Editing mode
TC inserts are ignored.
2) CMX340: This format is shared with the CMX340. Some data is converted so that the edit data is not perfectly restored even
when dumped data is loaded again.
1. Event numbers
Deleted event numbers are filled in for transmission.
Event numbers are ignored during reception, and one
hundred events are received in sequence starting with
the first one.
2. Reel numbers
All reel numbers are received as "0001."
3. Editing mode
Assemble editing is converted into insert editing (V, A1,
A2) for output.
TRANS P-VTR IN P-VTR OUT
00:09:45:15 00:09:48:03
00:09:48:03 00:09:55:27
REEL 0001 00:10:10:20
00:09:55:27 00:10:12:10
00:10:12:10 00:10:17:21
00:10:17:21 00:10:22:23
00:10:22:23 00:10:24:13
RECORDER 00:18:14.19
00:10:24:13 00:10:31:16
00:10:35:15 00:10:35:15
000 00:10:35:15
00:10:35:16 00:10:35:16
000
00:10:35:16
00:10:41:22 00:10:42:11
00:10:42:11 00:10:44:00
00:10:44:00 00:10:45:15
REEL 0001 00:10:48:11
00:10:50:05 00:10:51:10
00:10:51:10 00:10:56:18
00:10:56:18 00:11:00:11
00:11:00:11 00:11:04:27
Player IN point
Player OUT point
Effect C: cut ("cut" is the only effect available with this unit)
Editing mode VA12: insert editing
ASMBL: assemble editing
Reel No. 0001 ("0001" is the only reel number available with this unit)
Event number D: delete event
R-VTR IN R-VTR OUT
00:17:32.15 00:17:35.03
00:17:35.03 00:17:42.27
00:17:42.27 00:17:59.10
00:17:59.10 00:18:04.23
00:18:04.23 00:18:09.25
00:18:09.25 00:18:11.15
00:18:11.15 00:18:18.18
00:18:18.18 00:18:27.21
00:18:27.21 00:18:39.00
00:18:39.00 00:18:39.19
00:18:39.19 00:18:41.08
00:18:41.08 00:18:42.23
00:18:42.23 00:18:43.28
00:18:43.28 00:18:49.06
00:18:49.06 00:18:52.29
00:18:52.29 00:18:57.15
Recorder IN point
Recorder OUT point
4. Effect type
Only cut editing events are received.
5. Slow-motion editing
Only slow-motion editing events with speed data 0
(STILL) are received.
4. Effect type
Only cut editing events are received.
5. Slow-motion editing
Only slow-motion editing events with speed data 0
(STILL) are received.
6. Audio split editing
All audio split edit events are received as events entered
using the recorder as the reference.
56