TC JUMP FUNCTION
Editing is not normally possible in areas where the time code is discontinuous during the preroll period. However, using the TC
JUMP function, editing is performed using CTL as the reference in the preroll period and using TC as the reference after the IN
point has been passed (during edit recording). TC is displayed so that the unit can be operated as though TC editing were being
performed all the time.
! Set the menu No. 511 (TC JUMP) to VTR1, VTR2 or ALL.
(Select the VTR for which the TC JUMP function is to be used).
@ Carry out the regular automatic editing operations.
In the preview, automatic editing or review mode, the tape is first cued up to the IN point, it is prerolled using the CTL value
of the IN point as a reference, and it begins its approach. After it has passed the IN point and the edit recording mode is
established, editing continues using the TC as the reference.