DETAILED DESCRIPTION OF SET-UP MENUS
The underlined number and item are the factory settings.
This selects the time taken before the tape protection mode is established
when the laptop has been left standing in the stop or search STILL
(Units: s: seconds min: minutes)
In the case of the DV format, the time will remain at 10 seconds even if a
value higher than 10 seconds has been selected. However, operation will last
for up to 2 minutes on the selection screen.
This selects the operation in the tape protection mode when the laptop has
been left standing in the STILL mode.
0: STEP (STEP FWD in STILL mode)
1: Half loading
When STEP FWD has been selected, operation is automatically transferred
to half loading after the laptop has been left standing in the STILL mode for a
total of 30 minutes with the DVCPRO format or for a total of 1 minute with the
This selects whether the drum is to be stopped in the standby OFF mode.
0: The drum is stopped.
1: The drum keeps rotating.
This selects the tape protection mode when the unit is left standing in the stop
0: Step FWD
When step FWD has been selected, the mode will be automatically trans-
ferred to half-loading when the unit has been left standing in the stop mode
for a total of 30 minutes (or 1 minute for a DV tape).
Description of setting